Agilent Technologies InfinityLab LC Series User Manual page 295

5 Use the "/" and press Enter to list the current settings.
Figure 54 Telnet - Current settings in "Using Stored" mode
6 Change the IP address (in this example 192.168.254.12) and type "/" to list
Figure 55 Telnet - Change IP settings
Agilent InfinityLab LC Series Vialsamplers User Manual
current settings.
Manual Configuration
information about the LAN interface
MAC address, initialization mode
Initialization mode is Using Stored
active TCP/IP settings
TCP/IP status - here ready
connected to PC with controller software (e.g. Agilent
ChemStation), here not connected
change of IP setting to
Initialization mode is Using Stored
active TCP/IP settings
stored TCP/IP settings in non-volatile memory
connected to PC with controller software (e.g. Agilent
ChemStation), here not connected
13
LAN Configuration
295