Agilent Technologies InfinityLab LC Series User Manual page 74

3
Using the Module
Install a Column (ICC)
7
Turn the column onto the Quick Connect Fitting until it is
fingertight.
9
Connect and install the fitting fingertight.
11
Position the column into the Column Holder Clip(s).
74
8
Close the lever to make a pressure tight connection.
10
Use a wrench to counter the column while tightening the
capillary fitting.
12
Route the capillary leading to the system between the
latch and the Integrated Column Compartment.
N O T E
Optionally route the capillary to the side.
Agilent InfinityLab LC Series Vialsamplers User Manual