Bmc Module Disassembly - Western Digital OpenFlex F3 Series Instruction Manual

EcoDesign Disclosures
1.5 BMC Module Disassembly
Table 8: Replacement Procedure Info
• T7 Torx screwdriver
• T10 Torx screwdriver
Step 1 : Uninstall the BMC module from the enclosure.
a. Grasp the release handle with your forefinger on the bottom and thumb on the top of the
release latch and press the release latch with your thumb. The handle will eject from the
front of the BMC module.
Figure 28: Uninstalling the PCBA
Required Tools
1. EU EcoDesign Compliance

1.5 BMC Module Disassembly

# of People Required
1
35