Io Module (Iom) Disassembly - Western Digital OpenFlex Data24 Manual

EcoDesign Disclosures
Figure 57: Removing the Midplane PCB
R esult: T he OpenFlex™ Data24 Chassis is now disassembled.
W hat to do next: P roceed with the
1.5 IO Module (IOM) Disassembly
This procedure provides instructions for disassembling an OpenFlex™ Data24 IO Module (IOM).
Attention:
cards. For disassembling an IOM with a single add-in card, follow the steps to remove the add-
in card in the bottom position.
Table 4: Replacement Procedure Info
• T7 Torx screwdriver
• T10 Torx screwdriver
• 4.5mm nut driver
• Tweezers or needle-nose pliers
(recommended)
Using a T7 Torx screwdriver, remove the eight (8) screws securing the IO Module (IOM) cannister
Step 1 :
cover:
IO Module (IOM) Disassembly (page 33)
The following procedure provides steps to disassemble and IOM with three add-in
Required Tools
1. EU EcoDesign Disclosures

1.5 IO Module (IOM) Disassembly

.
# of People Required
• 1
33