Terminal Cover - YASKAWA A1000 Series Quick Start Manual

Three-Phase 200 V Class (CIMR-A 2A0169 to 0415)
■
Three-Phase 400 V Class (CIMR-A 4A0088 to 0675)
Figure 13

◆ Terminal Cover

Follow the procedure below to remove the terminal cover for wiring and to reattach the terminal cover after wiring is
complete.
■ CIMR-A 2A0004 to 0081, 4A0002 to 0044 (IP20/NEMA Type 1 Enclosure)
Removing the Terminal Cover
1.
Loosen the terminal cover screw.
Figure 14
Figure 14 Removing the Terminal Cover on an IP20/NEMA Type 1 Enclosure Drive
2.
Push in on the hook located on the bottom of the terminal cover, and gently pull forward. This should remove the
terminal cover.
Figure 15
Figure 15 Removing the Terminal Cover on an IP20/NEMA Type 1 Enclosure Drive
YASKAWA ELECTRIC TOEP C710616 21C YASKAWA AC Drive - A1000 Quick Start Guide
YEC_common Use terminals
for DC power supply
3 Phase power supply
200 to 240 Vac, 50 to 60 Hz
380 to 480 Vac, 50 to 60 Hz
Figure 13 Connecting Main Circuit Terminals
Braking Resistor Unit
(option)
+1 and −
Braking Unit
(option)
+3 −
+ 1
−
Drive
R/L1 U/T1
S/L2 V/T2
T/L3 W/T3
YEC_common
YEC_common
3 Electrical Installation
Motor
3
29