YASKAWA A1000 Series Quick Start Manual page 32

3 Electrical Installation
Removing/Reattaching the Front Cover
■
Removing the Front Cover
2A0004 to 2A0081 and 4A0002 to 4A0044
After removing the terminal cover and the digital operator, loosen the screw that affixes the front cover (model CIMR-
A 2A0056, 4A0031, 4A0038 do not use a screw to affix the front cover). Pinch inwards on hooks found on each side of
the front cover, then pull forward to remove it from the drive.
Figure 22
Figure 22 Remove the Front Cover (2A0004 to 2A0081 and 4A0002 to 4A0044)
2A0110 to 2A0415 and 4A0058 to 4A0675
1.
Remove the terminal cover and the digital operator.
2.
Loosen the installation screw on the front cover.
3.
Use a straight-edge screwdriver to loosen the hooks on each side of the cover that hold it in place.
Figure 23
Front cover
installation screw
Figure 23 Remove the Front Cover (2A0110 to 2A0415 and 4A0058 to 4A0675)
4.
First unhook the left side of the front cover, then swing the left side towards you as shown in the figure below
until the cover comes off.
Figure 24
Figure 24 Remove the Front Cover (2A0110 to 2A0415 and 4A0058 to 4A0675)
32
Hook
YEC_common
Hook
Free hooks on both
sides of the cover
YEC_common
YASKAWA ELECTRIC TOEP C710616 21C YASKAWA AC Drive - A1000 Quick Start Guide
YEC_common