YASKAWA A1000 Series Quick Start Manual page 153

No. Name
DeviceNet Communication
F6-51
Speed
F6-52 DeviceNet PCA Setting
F6-53 DeviceNet PPA Setting
DeviceNet Idle Mode Fault
F6-54
Detection
DeviceNet Baud Rate
F6-55
Monitor
F6-56 DeviceNet Speed Scaling
F6-57 DeviceNet Current Scaling
F6-58 DeviceNet Torque Scaling
F6-59 DeviceNet Power Scaling
F6-60 DeviceNet Voltage Scaling
F6-61 DeviceNet Time Scaling
F6-62 DeviceNet Heartbeat Interval Sets the heartbeat interval for DeviceNet communications.
F6-63 DeviceNet Network MAC ID Used to verify the MAC ID the drive has been assigned.
F6-64 to
Reserved
F6-71
<3> Parameter setting value is not reset to the default value when the drive is initialized.
YASKAWA ELECTRIC TOEP C710616 21C YASKAWA AC Drive - A1000 Quick Start Guide
0: 125 kbps
1: 250 kbps
2: 500 kbps
3: Adjustable from network
4: Detect automatically
Sets the format of the data set from the DeviceNet master to the drive.
Sets the format of the data set from the drive to the DeviceNet master.
0: Enabled
1: Disabled, no fault detection
Used to verify the baud rate running on the network.
0: 125 kbps
1: 250 kbps
2: 500 kbps
Sets the scaling factor for the speed monitor in DeviceNet.
Sets the scaling factor for the output current monitor in DeviceNet.
Sets the scaling factor for the torque monitor in DeviceNet.
Sets the scaling factor for the power monitor in DeviceNet.
Sets the scaling factor for the voltage monitor in DeviceNet.
Sets the scaling factor for the time monitor in DeviceNet.
Reserved for Dynamic I/O Assembly Parameters.
Description
B Parameter List
Setting
Default: 0
Min: 0
Max: 4
Default: 21
Min: 0
Max: 255
Default: 71
Min: 0
Max: 255
Default: 0
Min: 0
Max: 1
Default: 0
Min: 0
Max: 2
Default: 0
Min: -15
Max: 15
Default: 0
Min: -15
Max: 15
Default: 0
Min: -15
Max: 15
Default: 0
Min: -15
Max: 15
Default: 0
Min: -15
Max: 15
Default: 0
Min: -15
Max: 15
Default: 0
Min: 0
Max: 10
Default: 0
Min: 0
Max: 63
–
B
153