Removing And Attaching The Terminal Cover; Removing The Terminal Cover - YASKAWA G7 Series Technical Manual

Removing and Attaching the Terminal Cover

Remove the terminal cover to wire cables to the control circuit and main circuit terminals.

Removing the Terminal Cover

Models CIMR-G7U20P4 thru 2015 and 40P4 thru 4015
Loosen the screws at the bottom of the terminal cover, press in on the sides of the terminal cover in the
directions of arrows 1, and then lift up on the terminal in the direction of arrow 2.
Models CIMR-G7U2018 thru 2110 and 4018 thru 4300
Loosen the screws on the left and right at the top of the terminal cover, pull out the terminal cover in the
direction of arrow 1 and then lift up on the terminal in the direction of arrow 2.
-12
1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1
2
Fig 1.9 Removing the Terminal Cover (Model CIMR-G7U23P7 Shown Above)
2
Fig 1.10 Removing the Terminal Cover (Model CIMR-G7U2018 Shown Above)
1
1