Remove The Terminal Cover - YASKAWA CIPR-GA70C Series Initial Steps

5.
Carefully pull forward to remove the front cover.
A - Keypad connector
B - Hook
6.
Remove the wiring cover before wiring the main circuit terminal.
A - Wiring cover
■

Remove the Terminal Cover

1.
Loosen the screws on the terminal cover.
2.
Pull down on the cover.
3.
Pull forward on the terminal cover to free it from the drive.
YASKAWA ELECTRIC TOEP C710617 17D YASKAWA AC Drive GA700 Initial Steps
C - Connector holder
Figure 9.5 Remove the Front Cover
Figure 9.6 Removing the Terminal Cover
9 Mechanical Installation
EN 15
EN