Preface & General Safety; Preface; General Safety - YASKAWA A1000 Series Quick Start Manual

i Preface & General Safety

◆ Preface

Yaskawa manufactures products used as components in a wide variety of industrial systems and equipment. The selection
and application of Yaskawa products remain the responsibility of the equipment manufacturer or end user. Yaskawa
accepts no responsibility for the way its products are incorporated into the final system design. Under no circumstances
should any Yaskawa product be incorporated into any product or design as the exclusive or sole safety control. Without
exception, all controls should be designed to detect faults dynamically and fail safely under all circumstances. All
systems or equipment designed to incorporate a product manufactured by Yaskawa must be supplied to the end user with
appropriate warnings and instructions as to the safe use and operation of that part. Any warnings provided by Yaskawa
must be promptly provided to the end user. Yaskawa offers an express warranty only as to the quality of its products in
conforming to standards and specifications published in the Yaskawa manual. NO OTHER WARRANTY, EXPRESSED
OR IMPLIED, IS OFFERED. Yaskawa assumes no liability for any personal injury, property damage, losses, or claims
arising from misapplication of its products.
This manual is designed to ensure correct and suitable application of Variable A1000-Series Drives. Read this manual
before attempting to install, operate, maintain, or inspect a drive and keep it in a safe, convenient location for future
reference. Be sure you understand all precautions and safety information before attempting application.
Applicable Documentation
■
The following manuals are available for A1000 series drives:
DIGITAL OPERATOR JVOP-182 ALM
REV DRV FOUT
LO
ESC
RE
RESET ENTER
RUN STOP
CIMR-AA2A0021FAA
200V 3Phase 5.5kW/3.7kW
S/N:
WARNING AVERTISSMENT NPJT31470-1
Risk of electric shock. Risque de décharge électrique.
Read manual before installing.
● ● Lire le manuel avant l'installation.
● Wait 5 minutes for capacitor ● Attendre 5 minutes après la coupure
discharge after disconnecting de l'alimentation, pour permettre
power supply. la décharge des condensateurs.
To conform to requirements, Pour répondre aux exigences , s
● make sure to ground the supply ●
assurer que le neutre soit relié
neutral for 400V class. à la terre, pour la série 400V.
● After opening the manual switch Après avoir déconnécte la protection
between the drive and motor, entre le driver et le moteur, veuillez ●
please wait 5 minutes before patienter 5 minutes avain d'effectuer
inspecting, performing
une opération de montage ou de
maintenance or wiring the drive. câblage du variateur.
Hot surfaces Surfaces Chaudes
● Top and Side surfaces may Dessus et cotés du boitier Peuvent ●
become hot. Do not touch. devenir chaud. Ne Pas toucher.
危 険
けが．感電のおそれがあります。
● ● 据え付け、 運転の前には必ず取扱説明書を読むこと。
● ● 通電中および電源遮断後5分以内はフロントカバー
を外さない事。
● 400V級インバータの場合は、電源の中性点が接地
● されていることを確認すること。( 対応）
保守・点検、配線を行う場合は、出力側開閉器を
● ● 遮断後5分待って実施してください。
高温注意
インバータ上部、両側面は高温になります。
● 触らないでください。
●

◆ General Safety

Supplemental Safety Information
■
• The diagrams in this manual may be indicated without covers or safety shields to show details. Restore covers or
shields before operating the drive and run the drive according to the instructions described in this manual.
• Any illustrations, photographs, or examples used in this manual are provided as examples only and may not apply to
all products to which this manual is applicable.
• The products and specifications described in this manual or the content and presentation of the manual may be
changed without notice to improve the product and/or the manual.
• When ordering a new copy of the manual due to damage or loss, contact your Yaskawa representative or the nearest
Yaskawa sales office and provide the manual number shown on the front cover.
• If nameplate becomes worn or damaged, order a replacement from your Yaskawa representative or the nearest
Yaskawa sales office.
YASKAWA ELECTRIC TOEP C710616 21C YASKAWA AC Drive - A1000 Quick Start Guide
A1000 Series AC Drive Quick Start Guide (this book)
This guide is packaged together with the product. It contains basic information required to install and
wire the drive, in addition to an overview of fault diagnostics, maintenance, and parameter settings.
It is meant to get the drive ready for a trial run with the application and for basic operation.
A1000 Series AC Drive Technical Manual
This manual is included on the CD-ROM packaged with the product (Yaskawa AC Drive Manuals,
YEC_com
TOBCC71061621), and is also available for download on our documentation website, e-
mon
mechatronics.com. This manual provides detailed information on parameter settings, drive
functions, and MEMOBUS/Modbus specifications. Use this manual to expand drive functionality
and to take advantage of higher performance features.
General Precautions
i Preface & General Safety
7