YASKAWA A1000 Series Quick Start Manual page 55

LO/RE LED and RUN LED Indications
■
LED Lit
When source of the Run
command is assigned to the
digital operator (LOCAL)
During run
Examples
YASKAWA ELECTRIC TOEP C710616 21C YASKAWA AC Drive - A1000 Quick Start Guide
Table 18 LO/RE LED and RUN LED Indications
Flashing
–
• During deceleration to stop
• When a Run command is
input and frequency reference
is 0 Hz
4 Start-Up Programming & Operation
Flashing Quickly
–
• While the drive is set for
LOCAL, a Run command
was entered to the input
terminals after which the
drive was then switched to
REMOTE.
• A Run command was
entered via the input
terminals while not in the
Drive Mode.
• During deceleration when a
Fast Stop command was
entered.
• The drive output is shut off
by the Safe Disable
function.
• While the drive was running
in the REMOTE mode, the
STOP key was pushed.
• The drive was powered up
with b1-17 = 0 (default)
while the Run command is
active.
Off
Run command to be given from a
device other than the digital
operator (REMOTE)
During stop
4
55