Step 2 : The Machine Run-In - Roland monoFab SRM-20 User Manual

〇●〇〇

STEP 2 : The Machine Run-in

When the machine must be run-in
• When the machine is first set up
•
When the consumable part is replaced
• When the machine is not used for a prolonged period
Go to the "STEP 3 : Confirm the Command Set"
machine does not need to run-in.
Procedure
(p. 83), when the
81
1.
If a material, or cutting tool is mounted on the machine, remove it.
2.
Start VPanel.
""Start VPanel"
(p. 11)
3.
Click at the upper left of a screen, and click [Maintenance].
Preparing the Machine