Nortel Optical Multiservice Edge 6130 Planning Manual page 121

Figure 7-3
75 ohm termination panel - 16 channel
Table 7-18
Physical specifications for 75 ohm BNC termination panel
Feature
Data rate
75 ohm connector
120 ohm connector
(for interconnection with
OME6130 shelf)
Power supply
Link-to-data isolation
Temperature range
Height
Width
Depth
Note: The 75 ohm termination panel is labeled from 1-16 by default, but
includes an additional overlay label which can be installed by the user
when connecting the ports 17-28 of the 28xE1/DS1 circuit pack.
Physical specification
2.048 Mbps
Dual coax female BNC
64-pin Telco
none required
500 volts AC/DC
o
0-50 C
1U (44.0 mm / 1.9 in.)
483.0 mm / 19 in.
89.0 mm / 3.5 in.
Planning Guide NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
Technical specifications 7-19
Notes
See Table 7-14 on page 7-10
information on 64-pin connector.
for pinout