28Xe1/Ds1 Connector Pinouts - Nortel Optical Multiservice Edge 6130 Planning Manual

28xE1/DS1 connector pinouts

Figure 7-2 on page 7-9
first 64-pin Telco connector is used for ports 1 to 16 of the circuit pack and the
pinout is presented in
services. The second 64-pin Telco connector is used for ports 17 to 28 and the
pinout information is presented in
for DS1 services.
Figure 7-2
28 x E1/DS1 circuit pack faceplate
shows the faceplate of the 28xE1/DS1 circuit pack. The
Table 7-14
Planning Guide NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
Technical specifications 7-9
for E1 services and Table 7-15
Table 7-16 for E1 services and
for DS1
Table 7-17