Nortel Optical Multiservice Edge 6130 Planning Manual page 167

Table of Contents

Advertisement

Procedure 8-1 (continued)
Ordering OME6130 chassis, circuit packs, and software
Step
13
14
15
16
17
18
19
20
21
22
Ordering information and system engineering rules 8-25
Action
Determine the number of 64-pin Telco cables for E1/DS1 interface
requirements:
If
Line 7
is in the range
from 1 to 16
from 17 to 28
from 29 to 44
from 45 to 56
from 57 to 72
from 73 to 84
from 85 to 100
from 101 to 112
none
Determine the length for E1/DS1 cables.
If
Line 13
is
75 ohm
120 ohm
100 ohm
none
Order one (1) NT6Q60AA, OME6130 R1.0 DC system.
Order one (1) NT6Q66AA, 2x155/622M aggregate circuit pack with
OME6130 Release 1.0 software.
The number of 8x10/100BT L1 tributary circuit pack(s) required is recorded
on
Line
4. Order this quantity of NT6Q13AB, 8x10/100BT L1 tributary circuit
pack(s).
The number of 2xGE L1 tributary circuit pack(s) required is recorded on
6. Order this quantity of NT6Q20AA, 2xGE L1 tributary circuit pack(s).
The number of 28xE1/DS1 tributary circuit pack(s) required is recorded on
Line
8. Order this quantity of NT6Q10AA, 28xE1/DS1 tributary circuit pack(s).
The number of 3xE3/DS3 tributary circuit pack(s) required is recorded on
10. Order this quantity of NT6Q12AA, 3xE3/DS3 tributary circuit pack(s).
The number of 2x155/622M tributary circuit pack(s) required is recorded on
Line
12. Order this quantity of NT6Q17AA, 2x155M tributary circuit pack(s).
Order one (1) NT6Q70CA, OME6130 assembly kit.
Planning Guide NT6Q92MA Standard Rel 1.0 Iss 1 September 2006
Then
Enter '1' in
Line
14. Go to
Enter '2' in
Line
14. Go to
Enter '3' in
Line
14. Go to
Enter '4' in
Line
14. Go to
Enter '5' in
Line
14. Go to
Enter '6' in
Line
14. Go to
Enter '7' in
Line
14. Go to
Enter '8' in
Line
14. Go to
Enter 'none' on
Line
14. Go to
Then determine the length of cable
Enter 1 or 5 for the length of the
required cable in
Line
Enter 5, 10, 15 or 20 for the length of the
required cable in
Line
Enter 5 or 30 for the length of the
required cable in
Line
Enter 'none' in
Line
15.
step 14
step 14
step 14
step 14
step 14
step 14
step 14
step 14
step 15
15.
15.
15.
Line
Line

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents