Dcn Example 9 - Using Single Ome6500Gne With Iisis Through Ome6500 Network To Reach Remote Ome6130 Network Elements - Nortel Optical Multiservice Edge 6130 Planning Manual

DCN example 9 - Using single OME6500GNE with iISIS through OME6500
network to reach remote OME6130 network elements.
In this example (see
10-71), a single OME6500 network element is used as the GNE to establish
communication between the external DCN and the OME6130 and the
OME6500 network elements.
iISIS routing protocol is used with auto-tunneling to establish communication
from the OME6500 GNE to the remote OME6130 through the OME6500
network.
The remote OME6130 NEs are provisioned as proxy ARP neighbours at the
OME6500 GNE.
DCN provisioning details
Table 10-24 on page
page 10-74
Note: For parameters not listed, use the default settings.
Planning Guide NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
Appendix A: Data communications planning 10-69
Figure 10-19 on page 10-70
10-71, Table 10-25 on page 10-72
detail the DCN parameters for the DCN example 9 configuration.
and Figure 10-20 on page
and Table 10-26 on