Ordering Ome6130 Chassis, Circuit Packs, And Software - Nortel Optical Multiservice Edge 6130 Planning Manual

8-22 Ordering information and system engineering rules
Procedure 8-1
Ordering OME6130 chassis, circuit packs, and
software
Use this procedure to order OME6130 chassis, circuit packs, and software.
Repeat this procedure for each network element at a site in the OME6130
network.
Before you start
• Complete a network design.
• Read OME6130 network element configuration rules on page
• Photocopy Table 8-26 on page 8-28
Procedure tasks
• Record requirements
• Order chassis
• Order circuit packs
• Order OME6130 assembly kit
• Order small form-factor pluggable (SFP) modules
• Order the 75 ohm termination panel
• Order E1/DS1 cables
• Order software and RTU licences
Expected results
• You have a complete list of chassis, circuit packs, and software for an OME6130 site.
• If the expected results do not occur:
— Review the network design and repeat the procedure.
— Contact your next level of support.
Optical Multiservice Edge 6130 NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
and
(step 1).
(step 15).
(step 16).
(step 22).
(step
(step 26).
(step
8-2.
Table 8-28 on page 8-33
(step 24).
25)
29).
(if required).