Nortel Optical Multiservice Edge 6130 Planning Manual page 150

8-8 Ordering information and system engineering rules
Table 8-5 (continued)
OME6130 chassis and components
Description
Note 1: The OME6130 system kit contains a chassis equipped with two DC power supply unit, one
OAM circuit pack, one fan module with filter, two top I/O filler panels and 19" flange.
Note 2: The NT6Q66AA code includes one 2x155/622M aggregate card (NT6Q45AA) and one
OME6130 Release 1.0 software (NT6Q87AA).
Note 3: SFPs for the STM-1/4 interfaces need to be ordered separately.
Note 4: The DC PSU provides a single-feed OME6130 shelf power termination up to 6 A.
Note 5: The PSU can be ordered as spare or replacement.
Note 6: The OAM circuit pack can be ordered as spare or replacement.
Note 7: Each fan module consists of four fans. This module can be ordered as spare or replacement.
Note 8: An empty tributary circuit pack slot must be covered with a tributary filler panel. The tributary
filler panel must be ordered separately.
Note 9: The two top I/O slots must be covered with top I/O filler panels. Two top I/O filler panels come
equipped with the chassis, but can be ordered separately as spare or replacement.
Note 10: In Release 1.0, the aggregate circuit pack slot 7 must be covered with a aggregate filler panel.
The aggregate filler panel must be ordered separately.
Note 11: The air filter is part of the fan module which is included with the OME6130 system kit. The air
filter can be ordered as spare or replacement.
Optical Multiservice Edge 6130 NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
Order code Notes