Nortel Optical Multiservice Edge 6130 Planning Manual page 21

— low order path PM parameters
— E1/E3/DS1/DS3 PM parameters
— 10/100BT Ethernet and Gigabit Ethernet PM parameters
• DCN:
— OA&M over D1-D3 and F1 RS bytes
— OA&M over D4-D9 MS bytes
— OA&M over F2, F3 & F2F3 path overhead bytes
— overhead tunnel with RS, MS, E1, E2, F1 bytes
— E1/VC12 management channel
— F1 byte user channel access
— PPP/LAPD over DCC
— OSPF routing
— iISIS routing
— Auto GRE tunnels
— Proxy ARP
• web user interface (WUI):
— Microsoft Internet Explorer 6.0 or higher
— Mozilla 1.6 & 1.7 on Red Hat Linux, HP-UX and Solaris
— FireFox 1.0 on Red Hat Linux 7.x
• SNMP v1 and v2 trap monitoring
• interworking:
— subtending 1+1 MSP or multi-node SNCP from:
– Optical Metro 4100/4150/4200
– Optical Multiservice Edge 6500
– Optical Multiservice Edge 6110
— co-existing on rings:
– TN-1C/1X
Table 2-1 lists the features available in the Optical Multiservice Edge 6130.
For more information about these features, refer to the appropriate reference
in this planning guide. The following sections in this chapter give a brief
description of the main features.
Planning Guide NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
Feature overview 2-3