Ome6130 Shelf Assembly Kit; Circuit Packs - Nortel Optical Multiservice Edge 6130 Planning Manual

OME6130 shelf assembly kit

The OME6130 system kits described in
mounting brackets for a 19 in. rack. For 21 in. or 23 in. standard bay
installations, separate brackets can be obtained with the OME6130 shelf
assembly kit. It is recommended to order one OME6130 shelf assembly kit, as
listed in
Table 8-6

OME6130 shelf assembly kit

Description
OME6130 shelf assembly kit - cable routing brackets, rack mounting
screws, 21" and 23" flange, cage nuts, earthing cable
Note 1: This shelf assembly kit provides installation brackets for the OME6130 chassis. Included in
the kit are cable routing brackets, rack mounting screws, 21" and 23" flange, cage nuts and earthing
cable.
Note 2: It is recommended to have an OME6130 shelf assembly kit for each OME6130 shelf
installation.

Circuit packs

Table 8-7
tributary slots of the OME6130 chassis.
For rules on equipping the shelf, refer to
Table 8-7
Circuit packs for optional service slot
Description
8x10/100BT L1 Circuit Pack
2xGE L1 Circuit Pack
28xE1/DS1 Circuit Pack
3xE3/DS3 Circuit Pack
2x155M Circuit Pack
Note 1: Up to four tributary circuit packs can be inserted into the OME6130 chassis.
Note 2: SFPs for the STM-1 and GE interfaces need to be ordered separately.
Ordering information and system engineering rules 8-9
Table 8-6, for each NE.
provides a list of all the circuit packs that can be inserted into the
Planning Guide NT6Q92MA Standard Rel 1.0 Iss 1 September 2006
Table 8-5 on page 8-7
Order code
NT6Q70CA
Shelf equipping rules on page
Order code
NT6Q13AB
NT6Q20AA
NT6Q10AA
NT6Q10AB
NT6Q12AA
NT6Q17AA
include shelf
Notes
1, 2
8-4.
Notes
1
1, 2
1
1
1, 2