Nortel Optical Multiservice Edge 6130 Planning Manual page 157

Table 8-15 (continued)
Optical fiber patch cords
Description
Optical patchcords, LC-FC, MM 50 micron, Simplex
Optical patchcords, LC-ST, MM 50 micron, Simplex
Optical patchcords, LC-LC, MM 50 micron, Duplex
Optical patchcords, LC-SC, MM 50 micron, Duplex
Optical patchcords, LC-FC, MM 50 micron, Duplex
Optical patchcords, LC-ST, MM 50 micron, Duplex
Note 1: The optical patchcords are available in different lengths. The last digit of the order code defines
the length as shown in
Note 2: The singlemode fibers are used to transmit 1310 nm, 1550 nm and DWDM frequency signals
on singlemode fiber plant.
Note 3: The 50 micron multimode fibers are used to transmit 850 nm frequency signals on 50 micron
multimode fiber plant.
Table 8-16
Table 8-16
Lengths of optical fiber patchords
Length
1 meter
2 meters
3 meters
5 meters
7 meters
10 meters
13 meters
15 meters
20 meters
25 meters
30 meters
Note: This table defines the length and last digit of the
order codes shown in
example, an NTTC50AD is an optical patchcord,
LC-LC, SM, Simplex, 5 meters.
Table 8-16 on page 8-15.
lists the available lengths of optical fiber patchcords.
Table 8-15 on page
Planning Guide NT6Q92MA Standard Rel 1.0 Iss 1 September 2006
Ordering information and system engineering rules 8-15
Last digit of order code
A
B
C
D
E
F
G
H
J
K
L
8-14. For
Order code Notes
NTTC56Cx 1,3
NTTC56Dx 1,3
NTTC59Ax 1,3
NTTC59Bx 1,3
NTTC59Cx 1,3
NTTC59Dx 1,3