Snmp Traps - Nortel Optical Multiservice Edge 6130 Planning Manual

5-2 User interface description
The local craft access terminal provides support for the following functions:
•
•
•
•
•
•
•
•
•
•
Refer to
operations, administration, maintenance and provisioning (OAM&P)
capabilities supported by the OME6130 Release 1.0.
For more information on the Local Craft Access Terminal and the supported
applications, refer to the Local Craft Access User Guide, 323-1855-195.

SNMP traps

The OME6130 supports autonomous forwarding of system events through
SNMP traps for consolidated alarm reporting. The SNMP traps are sent to an
SNMP manager, such as HP Open View, where they can be used to alert a
system operator.
Up to eight SNMP trap managers can be provisioned for each OME6130
network element. For each trap destination, the IP address and the SNMP
version (v1 or v2) are provisioned.
For more information on how to provision the SNMP trap destinations, refer
to Provisioning and Protection Switching Procedures, 323-1855-310.
Optical Multiservice Edge 6130
fault and alarm management
equipment and facility management
PM viewing and threshold setting
synchronization management
upgrades and software download
backup and restore
protection status and control
nodal security management
nodal connection management
DCN communications management
Chapter 6, OAM&P description
NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
for more information about the