Nortel Optical Multiservice Edge 6130 Planning Manual page 165

Table of Contents

Advertisement

Procedure 8-1 (continued)
Ordering OME6130 chassis, circuit packs, and software
Action
Step
1
2
3
4
5
6
7
8
Ordering information and system engineering rules 8-23
Action
Note: Use a photocopy of
number references are to this table unless noted otherwise.
Determine the number of 10/100BT Ethernet Private Line (EPL) services that
are required, record the number in
required, enter 'none' on
Note: A maximum of 32 10/100BT EPL ports can be provisioned per
OME6130 shelf (8 ports for each 8x10/100BT L1 tributary circuit pack).
Determine the number of 8x10/100BT L1 tributary circuit pack that are
required. Divide the number recorded on
integer value on
Line
4. Enter 'none' if no 8x10/100BT L1 tributary circuit pack
is required.
Determine the number of GE EPL services that are required, record the
number in
Line
5. If no GE EPL services are required, enter 'none' on
Note: A maximum of 8 GE EPL ports can be provisioned per OME6130 shelf
(2 ports for each 2xGE L1 tributary circuit pack).
Determine the number of 2xGE L1 tributary circuit pack that are required.
Divide the number recorded on
value on
Line
6. Enter 'none' if no 2xGE L1 tributary circuit pack is required.
Determine the number of E1/DS1 services that are required, record the
number in
Line
7. If no E1/DS1 services are required, enter 'none' on
Note: A maximum of 112 E1/DS1 ports can be provisioned per OME6130
shelf (28 ports for each 28xE1/DS1 tributary circuit pack).
Determine the number of 28xE1/DS1 tributary circuit pack that are required.
Divide the number recorded on
value on
Line
8. Enter 'none' if no 28xE1/DS1 tributary circuit pack is
required.
Determine the number of E3/DS3 services that are required, record the
number in
Line
9. If no E3/DS3 services are required, enter 'none' on
Note: A maximum of 12 E3/DS3 ports can be provisioned per OME6130
shelf (3 ports for each 3xE3/DS3 tributary circuit pack).
Determine the number of 3xE3/DS3 tributary circuit pack that are required.
Divide the number recorded on
value on
Line
10. Enter 'none' if no 3xE3/DS3 tributary circuit pack is
required.
Planning Guide NT6Q92MA Standard Rel 1.0 Iss 1 September 2006
Table 8-26 on page 8-28
Line
3. If no 10/100BT EPL services are
Line
3.
Line 3
by 8 and record the round up
Line 5
by 2 and record the round up integer
Line 7
by 28 and record the round up integer
Line 9
by 3 and record the round up integer
for this procedure. All line
Line
Line
Line
5.
7.
9.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents