Installing a two-node system
Location of the printed circuit packs
Location of the printed circuit packs
PCPs are shipped in the module. The following sections are provided to give you
a complete reference to PCP location and to help you to replace PCPs you have
removed for any reason.
Location of the Enhanced MMP40 or MMP40 card
See the illustration that follows this procedure.
Standard 1.0
Step Action
1
Verify that the Enhanced MMP40 or MMP40 cards are installed
in slot 6 (node 1) and slot 7 (node 2).
Modular Option EC Installation Quick Reference Guide
Risk of equipment damage
Wear an antistatic wrist strap when handling
PCPs. As an additional safety measure, handle
the PCP by the edges and, whenever possible,
with the loosened packing material still around
it.
6-9
November 1999