Table of Contents
Advertisement
(7) Setting of the number of stitches to be sewn before changing the bobbin
A
< List screen >
B
< Counter setting screen >
1. Under the automatic mode, the set value of counter is automatically updated. So, do
not change it.
2. The remaining-thread length is 8 m at the maximum.
Be aware that a remaining-thread removal error may occur if the length of thread to
be removed exceeds 8 m. It is recommended to set the number of stitches to be sewn
before changing the bobbin so that the remaining thread length is 8 m or less.
The number of stitches to be sewn before changing the
bobbin has to be set only under the manual mode. In
the case of the auto mode, preset number of stitches
will be automatically updated.
The number of stitches to be sewn before changing the bobbin is
set on the counter setting screen.
Press
. Then, press
in the list displayed on the screen to display the counter setting
screen.
B : Counter type selection button
When you press this button, the counter type selection screen
is displayed. On this screen, the counter method can be
selected from the UP counter / DOWN counter. Do not select
"Disable".
C : Bobbin-thread counter current value button
D
When you press this button, the bobbin-thread counter current
C
value screen is displayed to allow you to set and clear the cur-
rent value on the counter. The unit of the counter set value is
"x10" stitches.
D : Bobbin-thread counter target value button
When you press this button, the bobbin-thread counter target
value screen is displayed to allow you to set and clear the set
value on the counter. The unit of the counter set value is "x10"
stitches.
Number of stitches : Min. 10 stitches (Display: 1)
– 109 –
Max. 99990 stitches (Display: 9999)
A included
Advertisement
Table of Contents
