Table of Contents
Advertisement
7. Performing re-sewing
When stop switch A is pressed during sewing
operation, the sewing machine interrupts sewing
and stops. At this time, error display screen B is
displayed to inform that the stop switch is pressed.
To continue performing sewing from
some point in sewing
Sewing motion stop status
Error display screen B is displayed.
1) Release the error.
❸
Press RESET key
Then step motion screen C is displayed.
2) Return the presser.
Press BACKWARD key
presser returns stitch by stitch.
Press FORWARD key ❼ -2
presser advances stitch by stitch. Return the
presser to the re-sewing position.
3) Start sewing again.
Depress the right side pedal and sewing starts again.
To perform re-sewing from the start
Sewing motion stop status
Error display screen B is displayed.
1) Release the error.
❸
Press RESET key
Then step motion screen C is displayed.
2) Return the presser to the sewing
product setting position.
Press again RESET key
presser returns to the sewing product setting
position.
3) Perform again the sewing work from
the start.
to release the error.
❼ -1
and the
and the
to release the error.
❸
and the
Error No.
D
E
* Existing number of stitches/total number of stitches
are displayed in section D.
* Existing sewing command is displayed in section E.
Kinds of commands are :
Sewing
command
Thread trimmer
command
– 28 –
Error pictograph
❼ -1
C
❸
Jump feed
command
Knife command
A
B
❼ -2
Advertisement
Table of Contents
