3-13. Handling the cords
DANGER :
To prevent personal injuries caused by electric shock hazards or abrupt start of the sewing
machine, carry out the work after turning OFF the power switch and a lapse of 5 minutes or more.
To prevent accidents caused by unaccustomed work or electric shock, request the electric expert
or engineer of our dealers when adjusting the electrical components.
❹
❸
1) Bring the cords under the table into the control
❷
2) Put the cord brought into the control box through
❶
A
3) Install control box lid ❸ with four setscrews ❹ .
-
-
11
box.
cord exit plate ❶ and fix cable clip band ❷ .
Arrange the cord so that it is not tensed
or hitched even when the machine head is
tilted. (See A section)