Installing The Control Box (For Tc16A And Tc16B Only); Replacing Procedure Of The Cloth Plate (Left) When Installing Tc16 After Setting Up The Sewing Machine; Installing The Tape Guide (Auxiliary Presser) - JUKI TC16 Instruction Manual

2. Installing the control box (for TC16A and TC16B only)

WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following work
after turning the power off and ascertaining that the motor is at rest.
Drawer
Stand

3. Replacing procedure of the cloth plate (left) when installing TC16 after setting up the sewing machine

WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following work
after turning the power off and ascertaining that the motor is at rest.

4. Installing the tape guide (auxiliary presser)

WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following work
after turning the power off and ascertaining that the motor is at rest.
❷
Control Box
❷
❷
❶
❹
❸
❶
❹
❸
Install the control box on the bottom surface of the table with
wood screws supplied as accessories with the unit.
1) Loosen four setscrews ❷ and remove the standard
cloth plate (left) ❶.
2) Install cloth plate (left) for tape cutter ❸ with three set-
screws ❹.
Part No.
For C11 40019896
For E11 70003999
Moreover, use the setscrews of the standard cloth
plate (left) ❶ for installing.
1) Remove presser foot ❶ from the sewing machine.
2) Remove presser spring setscrew ❷ and tighten tape
guide ❸ together with the presser spring.
(Install tape guide ❸ so that it is placed on presser
spring ❹.)
– 3 –
Description
TC cover
TC cover for subclass