Spark Plug
IGNITION
D: ADJUSTMENT
Clean the spark plugs using a wire brush.
Clean and remove the carbon or oxide deposits.
But do not wear away ceramic insulator.
If deposits are too stubborn, replace the plugs.
After cleaning the spark plugs, correct the spark
plug gap using a gap gauge.
NOTE:
Do not use a plug cleaner because the spark plugs
are applied with iridium tip.
Spark plug gap: L
0.7 — 0.8 mm (0.028 — 0.031 in)
L
(A)
IG-00015
NOTE:
Replace with a new spark plug if this area (A) is
worn to "ball" shape.
IG(H4DOTC)-6