Subaru Legacy 2004 Service Manual page 1253

Hide thumbs Also See for Legacy 2004:

Table of Contents

11.Coolant Filler Tank

The radiator is pressurized. Wait until engine

cools down before working on the radiator.

1) Remove the collector cover.

2) Drain the coolant about 3.0 2 (3.2 US qt, 2.6

Imp qt). <Ref. to CO(H4DOTC)-13, DRAINING OF

ENGINE COOLANT, REPLACEMENT, Engine

3) Disconnect the engine coolant hoses from cool-

ant filler tank.

4) Remove the bolts which install the coolant filler

5) Disconnect the engine coolant hose which con-

nects the under side of coolant filler tank.

6) Remove the coolant filler tank.

B: INSTALLATION

1) Install in the reverse order of removal.

Tightening torque:

m (1.6 kgf-m, 11.8 ft-lb)

2) Fill with engine coolant. <Ref. to CO(H4DOTC)-

13, FILLING OF ENGINE COOLANT, REPLACE-

MENT, Engine Coolant.>

Coolant Filler Tank

CO(H4DOTC)-31

Chapters

Table of Contents