Subaru Legacy 2004 Service Manual page 1039

13) Connect the engine coolant hose to throttle
body.
14) Connect the PCV hose assembly to cylinder
block.
15) Install the coolant filler tank.
<Ref. to CO(H4DOTC)-31, INSTALLATION, Cool-
ant Filler Tank.>
16) Install the intercooler. <Ref. to IN(H4DOTC)-
12, INSTALLATION, Intercooler.>
17) Install the intake duct to air cleaner case.
18) Install the fuse of fuel pump to main fuse box.
19) Connect the battery ground cable to battery.
20) Lift-up the vehicle.
21) Install the under cover.
22) Fill with engine coolant.
<Ref. to CO(H4DOTC)-13, FILLING OF ENGINE
COOLANT, REPLACEMENT, Engine Coolant.>
23) Install the collector cover.
C: DISASSEMBLY
1) Disconnect the engine ground terminal from
ground stay.
Intake Manifold
2) Remove the solenoid valve bracket assembly
from intake manifold, and disconnect the connector
from the wastegate control solenoid valve, manifold
absolute pressure sensor and purge control sole-
noid valve.
FU-01158
3) Disconnect the evaporation hoses (A) and filter
assembly (B).
FU-01160
4) Disconnect the connectors from throttle position
sensor.
5) Remove the throttle body from intake manifold.
FU-01170
FU(H4DOTC)-17
FUEL INJECTION (FUEL SYSTEMS)
(A)
(B)
EC-00219
FU-01172
FU-01157
FU-01159