Manifold Absolute Pressure Sensor - Subaru Legacy 2004 Service Manual

Manifold Absolute Pressure Sensor

FUEL INJECTION (FUEL SYSTEMS)
10.Manifold Absolute Pressure
Sensor
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
IN-00203
3) Disconnect the connector from manifold abso-
lute pressure sensor (A), and remove the filter as-
sembly (B) from intake manifold.
4) Remove the manifold absolute pressure sensor
from solenoid valve bracket.
(A)
(B)
FU-01188
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
!
6.5 N m (0.66 kgf-m, 4.8 ft-lb)
FU(H4DOTC)-29