Subaru Legacy 2004 Service Manual page 1171

MECHANICAL
6) Install the cam sprocket.
<Ref. to ME(H4DOTC)-51, INSTALLATION, Cam
Sprocket.>
7) Install the timing belt.
<Ref. to ME(H4DOTC)-44, INSTALLATION, Tim-
ing Belt.>
8) Install the timing belt cover.
<Ref. to ME(H4DOTC)-42, INSTALLATION, Tim-
ing Belt Cover.>
9) Install the crank pulley.
<Ref. to ME(H4DOTC)-41, INSTALLATION, Crank
Pulley.>
10) Install the V-belts. <Ref. to ME(H4DOTC)-39,
INSTALLATION, V-belt.>
C: DISASSEMBLY
1) Remove the valve lifter.
2) Compress the valve spring and remove the
valve spring retainer key. Remove each valve and
valve spring.
ST1 498267600 CYLINDER HEAD TABLE
ST2 499718000 VALVE SPRING REMOVER
NOTE:
Keep all the removed parts in order for re-installing
in their original positions.
CAUTION:
• Mark each valve to prevent confusion.
• Use extreme care not to damage the lips of
the intake valve oil seals and exhaust valve oil
seals.
ST2
ST1
Cylinder Head
ME-00124
ME(H4DOTC)-60