Subaru Legacy 2004 Service Manual page 1033

Hide thumbs Also See for Legacy 2004:

Table of Contents

• Wear work clothing, including a cap, protective

goggles and protective shoes during operation.

• Remove contamination including dirt and corro-

sion before removal, installation or disassembly.

• Keep the disassembled parts in order and pro-

tect them from dust and dirt.

• Before removal, installation or disassembly, be

sure to clarify the failure. Avoid unnecessary re-

moval, installation, disassembly and replacement.

D: PREPARATION TOOL

ILLUSTRATION

ST24082AA230

ST22771AA030

General Description

SUBARU SELECT

FU(H4DOTC)-11

FUEL INJECTION (FUEL SYSTEMS)

• Be careful not to burn yourself, because each

part on the vehicle is hot after running.

• Be sure to tighten fasteners including bolts and

nuts to the specified torque.

• Place shop jacks or rigid racks at the specified

• Before disconnecting electrical connectors of

sensors or units, be sure to disconnect the ground

cable from battery.

• Place "NO FIRE" signs near the working area.

• Be careful not to spill fuel on the floor.

Troubleshooting for electrical system.

• English: 22771AA030 (Without printer)

• German: 22771AA070 (Without printer)

• French: 22771AA080 (Without printer)

• Spanish: 22771AA090 (Without printer)

Chapters

Table of Contents