Subaru Legacy 2004 Service Manual page 1156

2) Install the automatic belt tension adjuster as-
sembly.
Tightening torque:
!
39 N m (4.0 kgf-m, 28.9 ft-lb)
3) Install the belt idler No. 2.
Tightening torque:
!
39 N m (4.0 kgf-m, 28.9 ft-lb)
4) Install the belt idlers.
Tightening torque:
!
39 N m (4.0 kgf-m, 28.9 ft-lb)
2. TIMING BELT
1) Preparation for installation of automatic belt ten-
sion adjuster assembly. <Ref. to ME(H4DOTC)-44,
AUTOMATIC BELT TENSION ADJUSTER AS-
SEMBLY AND BELT IDLER, INSTALLATION,
Timing Belt.>
2) Crankshaft and cam sprocket alignment
Timing Belt
(1) Align the mark (A) on crank sprocket with
the mark on oil pump cover at cylinder block.
(2) Align single line mark (A) on the exhaust
cam sprocket (RH) with notch (B) on timing belt
ME-00079
cover.
(3) Align single line mark (A) on the intake cam
sprocket (RH) with notch (B) on timing belt cov-
er. (Ensure double lines (C) on intake and ex-
ME-00075
haust cam sprockets are aligned.)
ME-00080
ME(H4DOTC)-45
(A)
(A)
(B)
(B)
(A)
(C)
MECHANICAL
ME-00081
ME-00082
ME-00083