Subaru Legacy 2004 Service Manual page 1241

6. Radiator
A: REMOVAL
WARNING:
The radiator is pressurized. Wait until engine
cools down before working on the radiator.
1) Set the vehicle on a lift.
2) Remove the collector cover.
3) Disconnect the ground cable from battery.
4) Lift-up the vehicle.
5) Remove the under cover.
6) Remove the heat shield cover from radiator.
7) Drain engine coolant completely.
<Ref. to CO(H4DOTC)-13, DRAINING OF EN-
GINE COOLANT, REPLACEMENT, Engine Cool-
ant.>
Radiator
8) Disconnect the connectors of radiator main fan
motor (A) and sub fan motor (B).
IN-00203
9) Disconnect the ATF cooler hoses from ATF
pipes.
Plug the ATF pipe to prevent ATF leaks.
CO-00250
10) Disconnect the radiator outlet hose from ther-
mostat cover.
11) Lower the vehicle.
12) Remove the
IN(H4DOTC)-9, REMOVAL, Air Intake Duct.>
13) Disconnect the over flow hose.
CO(H4DOTC)-19
COOLING
(A)
CO-00251
(B)
CO-00252
CO-00253
CO-00249
air intake duct. <Ref. to