Subaru Legacy 2004 Service Manual page 1219

5. Rear Exhaust Pipe
A: REMOVAL
1) Lift-up the vehicle.
2) Separate the rear exhaust pipe from center ex-
haust pipe.
3) Separate the rear exhaust pipe from both muf-
flers.
CAUTION:
Be careful not to pull down the rear exhaust
pipe.
4) Remove the rear exhaust pipe.
B: INSTALLATION
NOTE:
Use a new gasket.
1) Install the rear exhaust pipe to both mufflers.
Tightening torque:
!
48 N m (4.9 kgf-m, 35.4 ft-lb)
2) Install the rear exhaust pipe to center exhaust
pipe.
Rear Exhaust Pipe
Tightening torque:
35 N
3) Lower the vehicle.
C: INSPECTION
1) Check the connections and welds for exhaust
EX-00207
leaks.
2) Check the rear exhaust pipe for holes or rust.
3) Check the cushion rubber for wear or crack.
EX-00210
EX-00210
EX(H4DOTC)-11
!
m (3.6 kgf-m, 26.0 ft-lb)
EXHAUST
EX-00207