13) Remove the fuel injectors.
14) Remove the bolts which hold the fuel injector
pipe RH onto the lower side of intake manifold.
15) Loosen the clamp which holds fuel hose to in-
jector pipe, and then disconnect the pipe from fuel
hose.
16) Remove the fuel injector pipe.
17) Remove the intake manifold (upper) from in-
take manifold (lower).
Intake Manifold
D: ASSEMBLY
1) Install the intake manifold (lower) to intake man-
ifold (upper).
NOTE:
Use new O-rings.
Tightening torque:
8.3 N
FU-01181
2) Install the fuel injector pipe.
3) Connect the both fuel injector pipes with a fuel
hose and secure them with clamps.
FU-01182
4) Tighten the bolt which secures the fuel injector
pipe RH onto the lower side of intake manifold.
Tightening torque:
6.5 N
FU-01183
FU-01184
FU(H4DOTC)-19
FUEL INJECTION (FUEL SYSTEMS)
!
m (0.85 kgf-m, 6.1 ft-lb)
!
m (0.66 kgf-m, 4.8 ft-lb)
FU-01184
FU-01183
FU-01182