Subaru Legacy 2004 Service Manual page 1099

2. Air Cleaner Element
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector (A) from mass air flow
sensor.
3) Loosen the clamps (B) which connect air intake
boot to intake duct.
4) Remove the clips (C) from air cleaner case.
(A)
(C)
5) Remove the air cleaner case (rear) and air in-
take boot.
6) Remove the air cleaner element.
Air Cleaner Element
IN-00203
(C)
(B)
(B)
IN-00218
IN(H4DOTC)-7
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
When installing the air cleaner case (rear), align the
protrusion part of air cleaner case (rear) to the hole
of air cleaner case (front).
C: INSPECTION
Replace if excessively damaged or dirty.
INTAKE (INDUCTION)
IN-00220