Subaru Legacy 2004 Service Manual page 1139

MECHANICAL
9. Engine Assembly
A: REMOVAL
1) Set the vehicle on a lift.
2) Open the front hood fully and support with a front
food stay.
3) Collect the refrigerant from A/C system. <Ref. to
AC-20, Refrigerant Recovery Procedure.>
4) Release the fuel pressure.
(1) Remove the fuse of fuel pump from main
fuse box.
(2) Start the engine, and run until stalls.
(3) After the engine stalls, crank it for 5 seconds
more.
(4) Turn the ignition switch to OFF.
5) Remove the fuel filler cap.
6) Remove the collector cover.
7) Disconnect the ground cable from battery.
8) Remove the radiator from vehicle. <Ref. to
CO(H4DOTC)-19, REMOVAL, Radiator.>
9) Remove the coolant filler tank.
<Ref. to CO(H4DOTC)-31, REMOVAL, Coolant
Filler Tank.>
Engine Assembly
10) Disconnect the A/C pressure hoses from A/C
compressor.
11) Repair the air intake system.
(1) Remove the intercooler. (DOHC turbo mod-
el) <Ref. to IN(H4DOTC)-12, REMOVAL, Inter-
cooler.>
(2) Remove the air cleaner element and air
cleaner case. <Ref. to IN(H4DOTC)-8, REMOV-
AL, Air Cleaner Case.>
12) Disconnect the following connectors and ca-
FU-01122
bles.
(1) Engine harness connectors
IN-00203
ME(H4DOTC)-30
ME-00803
FU-01162
FU-01163