Subaru Legacy 2004 Service Manual page 1247

B: INSTALLATION
1) Install the radiator main fan motor assembly to
vehicle.
2) Connect the radiator inlet hose (A) to radiator.
3) Install the hood stay holder (B).
4) Install the mounting bolts of radiator main fan
motor assembly.
5) Install the reservoir
CO(H4DOTC)-30, INSTALLATION,
Tank.>
6) Install the over flow pipe.
7) Connect the over flow hose.
8) Install the air intake duct.
9) Lift-up the vehicle.
10) Attach the ATF hose to the clip of radiator main
fan motor assembly.
11) Install the heat shield cover to radiator.
Radiator Main Fan and Fan Motor
(A)
(B)
CO-00255
CO-00259
tank. <Ref.
Reservoir
CO-00250
CO(H4DOTC)-25
12) Connect the main fan motor connector (A).
13) Install the under cover.
14) Lower the vehicle.
15) Connect the battery ground cable to battery.
16) Fill engine coolant.
<Ref. to CO(H4DOTC)-13, FILLING OF ENGINE
COOLANT, REPLACEMENT, Engine Coolant.>
17) Install the collector cover.
to
COOLING
(A)
CO-00251
IN-00203