Subaru Legacy 2004 Service Manual page 1162

17.Cam Sprocket
A: REMOVAL
1) Remove the V-belts. <Ref. to ME(H4DOTC)-39,
REMOVAL, V-belt.>
2) Remove the crank pulley.
<Ref. to ME(H4DOTC)-41, REMOVAL, Crank Pul-
ley.>
3) Remove the timing belt cover.
<Ref. to ME(H4DOTC)-42, REMOVAL, Timing Belt
Cover.>
4) Remove the timing belt.
<Ref. to ME(H4DOTC)-43, REMOVAL, Timing
Belt.>
5) Remove the cam sprocket. To lock the cam-
shaft, use ST.
ST 499977500 CAM SPROCKET WRENCH
B: INSTALLATION
1) Install the cam sprocket. To lock the camshaft,
use ST.
Tightening torque:
!
Tighten to 29.5 N m (3.0 kgf-m, 21.8 ft-lb) of
torque, and then tighten further by 45
2) Install the timing belt. <Ref. to ME(H4DOTC)-44,
INSTALLATION, Timing Belt.>
3) Install the timing belt cover.
<Ref. to ME(H4DOTC)-42, INSTALLATION, Tim-
ing Belt Cover.>
4) Install the crank pulley.
<Ref. to ME(H4DOTC)-41, INSTALLATION, Crank
Pulley.>
5) Install the V-belts. <Ref. to ME(H4DOTC)-39,
INSTALLATION, V-belt.>
Cam Sprocket
C: INSPECTION
1) Check the cam sprocket teeth for abnormal wear
and scratches.
2) Make sure there is no free play between cam
sprocket and key.
3) Check the cam sprocket protrusion used for sen-
sor for damage and contamination of foreign mat-
ter.
ME-00838
#
ME-00838
ME(H4DOTC)-51
MECHANICAL