Subaru Legacy 2004 Service Manual page 1270

Tightening torque:
#
83 N m (8.5 kgf-m, 61 ft-lb)
7) Install the front exhaust pipe.
<Ref. to EX(H4DOTC)-5, INSTALLATION, Front
Exhaust Pipe.> <Ref. to EX(H4SO 2.0)-8, INSTAL-
LATION, Front Exhaust Pipe.>
8) Install the under cover.
9) Lower the vehicle.
CAUTION:
When lowing the vehicle, lower the lift-up de-
vice and wire ropes at the same time.
10) Remove the lifting device and wire ropes.
11) Install the pitching stopper.
Tightening torque:
#
T1: 50 N m (5.1 kgf-m, 36.9 ft-lb)
#
T2: 58 N m (5.9 kgf-m, 42.8 ft-lb)
T2
12) Install the linear motion mounting.
<Ref. to ME(H4DOTC)-37, INSTALLATION, Linear
Motion Mounting.>
Oil Pan and Strainer
LU-02023
LU-00222
T1
LU-00224
LU(H4DOTC)-15
13) Install the radiator upper brackets.
14) Install the intercooler. <Ref. to IN(H4DOTC)-
12, INSTALLATION, Intercooler.>
15) Install the air intake boot and air cleaner upper
cover.
16) Connect the connector to mass air flow sensor.
17) Install the front wheels.
18) Install the collector cover.
19) Connect the battery ground cable to battery.
20) Fill engine oil. <Ref. to LU(H4DOTC)-8, IN-
SPECTION, Engine Oil.>
C: INSPECTION
Visually check that the oil pan, oil strainer, oil
strainer stay and baffle plate are not damaged.
LUBRICATION
CO-00040
LU-00220
IN-00203