Subaru Legacy 2004 Service Manual page 1214

EXHAUST
3. Center Exhaust Pipe
A: REMOVAL
1) Set the vehicle on a lift.
2) Remove the collector cover.
3) Disconnect the ground cable from battery.
4) Remove the intercooler. <Ref. to IN(H4DOTC)-
12, REMOVAL, Intercooler.>
5) Remove the intercooler bracket.
6) Lift-up the vehicle.
7) Remove the under cover.
8) Remove the universal joint bolts and then re-
move the universal joint.
CAUTION:
Scribe alignment marks on the universal joint
so that it can be reassembled at the original
serration.
9) Lower the vehicle.
10) Remove the linear motion mounting. <Ref. to
ME(H4DOTC)-37, REMOVAL,
Mounting.>
11) Remove the linear motion mounting bracket.
Center Exhaust Pipe
12) Remove the turbocharger cover.
13) Separate the center exhaust pipe from turbo-
charger.
EX-00203
14) Disconnect the connector from front oxygen (A/
F) sensor.
EX-00008
15) Lift-up the vehicle.
Linear Motion
16) Disconnect the connector from rear oxygen
sensor.
EX(H4DOTC)-6
(A)
(A) Linear motion mounting bracket
(B) Turbocharger cover
(B)
EX-00249
EX-00204
EX-00205
EX-00206