Subaru Legacy 2004 Service Manual page 1044

FUEL INJECTION (FUEL SYSTEMS)
NOTE:
Connect the evaporation hose as shown in the fig-
ure.
(A)
(A) To intake manifold
(B) To evaporation pipe
16) Connect the connector to the wastegate control
solenoid valve, manifold absolute pressure sensor
and purge control solenoid valve, and install the so-
lenoid bracket assembly to intake manifold.
Tightening torque:
!
19 N m (1.94 kgf-m, 13.7 ft-lb)
17) Install the engine ground terminal to ground
stay.
Tightening torque:
!
19 N m (1.94 kgf-m, 13.7 ft-lb)
E: INSPECTION
Make sure that the fuel hoses and fuel pipes are not
cracked and that connections are tight.
Intake Manifold
(B)
EC-00273
EC-00219
FU-01170
FU(H4DOTC)-22