Subaru Legacy 2004 Service Manual page 1243

6) Install the hood stay holder (B).
7) Install the reservoir
CO(H4DOTC)-30, INSTALLATION,
Tank.>
8) Connect the over flow hose.
9) Install the air intake duct.
<Ref. to IN(H4DOTC)-9, INSTALLATION, Air In-
take Duct.>
10) Lift-up the vehicle.
11) Connect the ATF cooler hoses.
12) Connect the radiator outlet hose.
Radiator
(A)
(B)
CO-00255
tank. <Ref.
Reservoir
CO-00253
CO-00249
CO(H4DOTC)-21
13) Connect the connectors to radiator main fan
motor (A) and sub fan motor (B).
to
14) Install the heat shield cover.
15) Install the under cover.
16) Lower the vehicle.
17) Connect the battery ground cable to battery.
18) Fill engine coolant.
<Ref. to CO(H4DOTC)-13, FILLING OF ENGINE
COOLANT, REPLACEMENT, Engine Coolant.>
19) Check the ATF level. <Ref. to 5AT-27, IN-
SPECTION, Automatic Transmission Fluid.>
20) Install the collector cover.
COOLING
(A)
CO-00251
(B)
CO-00252
CO-00250
IN-00203