Subaru Legacy 2004 Service Manual page 1141

Hide thumbs Also See for Legacy 2004:

Table of Contents

18) Disconnect the oil flow control solenoid valve

connector and ground cable.

19) Remove the nuts which hold lower side of the

transmission to engine.

20) Remove the nuts which install front cushion

rubber onto front crossmember.

21) Separate the torque converter clutch from drive

(1) Lower the vehicle.

(2) Remove the service hole plug.

(3) Remove the bolts which hold torque con-

verter clutch to drive plate.

Engine Assembly

(4) Remove other bolts while rotating the en-

gine using a socket wrench.

22) Remove the pitching stopper.

23) Disconnect the fuel delivery hose, return hose

and evaporation hose.

• Collect fuel from the hose into container.

• Disconnect the hose with its end wrapped

with cloth to prevent fuel from splashing.

24) Support the engine with a lifting device and

ME(H4DOTC)-32

Chapters

Table of Contents