Subaru Legacy 2004 Service Manual page 1037

CAUTION:
• Be careful not to spill fuel.
• Catch the fuel from hoses using a container
or cloth.
24) Remove the bolts which hold intake manifold
onto the cylinder heads.
25) Remove the intake manifold.
B: INSTALLATION
1) Install the intake manifold onto cylinder heads.
NOTE:
Use a new gasket.
Tightening torque:
!
25 N m (2.5 kgf-m, 18.1 ft-lb)
2) Connect the fuel delivery hose, return hose and
evaporation hose.
Intake Manifold
NOTE:
If fuel hoses or clamps are damaged, replace them
with new ones.
FU-01168
3) Tighten the hose clamp screws.
Tightening torque:
1.25 N
4) Connect the connector to the exhaust camshaft
position sensor (A) and exhaust oil flow control so-
lenoid valve (B).
FU-01169
5) Connect the connector to intake oil flow control
solenoid valve.
FU-01169
FU(H4DOTC)-15
FUEL INJECTION (FUEL SYSTEMS)
!
m (0.13 kgf-m, 0.94 ft-lb)
(B)
FU-01168
(A)
FU-01167
FU-01166