Setting The Time For An External Room Monitor; Interdigit Pause Time Setting - Siemens HiPath 1100 Programming Manual

Step by Step
...
0 1
1
Setting the Time for an external Room
Monitor
This setting specifies a timeout for the automatic dis-
connection of a call, in order to enable a Room Monitor
(Babyphone) from an external telephone.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 6 9
9 9 Enter the length of time (01 to 99 seconds) for external
monitoring. The default setting is 10 seconds.
Initial state for Programming Mode.

Interdigit Pause Time Setting

It lets you configure a pause ("P") between MF digits.
This can be used when programming System and
Individual Speed Dialing, system telephone program-
mable keys or for activating Suffix Dialing.
This period of time can be set from 1 to 5 seconds. The
default setting is 2 seconds.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 2 7
... Enter the length of time for the Pause (from 1 to 5
5
seconds)/
Initial state for Programming Mode.
General Programming
97