Cd Port Assignment - Siemens HiPath 1100 Programming Manual

Step by Step
0 1 ...

CD Port Assignment

Assigning CD ports to extension slots allows system
telephones to be connected to the PABX.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 4 6
2 4 Enter a number from 01 to 24 for the CD port.
0 1
0 1
0 1
Enter the extension number (e.g. 12/102) to which you
want to assign a CD port.
Enter the next number for the CD port and extension.
or
# Press this key.
Initial state for Programming Mode.
Deleting a CD Assignment from an Extension
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 4 6
Enter a number from 01 to 24 for the CD port.
Enter the extension number (e.g. 12/102) to bemed.
Delete the CD assignment from the extension.
*
Enter the next number for the CD port and extension.
or
Press this key.
#
Initial state for Programming Mode.
to = for HiPath 1120
0 4
a 0 8 = for HiPath 1150
a = for HiPath 1190
2 4
By default, the assignment starts at the first ex-
tension slot on HiPath 1120/1150/ systems.
Programming an Extension
79